Thunder Scientific Corporation - Humidity Generation and Calibration Equipment NVLAP - Code 200582-0

Contact Us:

Toll Free: (800) 872-7728
Phone: (505) 265-8701
FAX: (505) 266-6203

 

E-mail:

sales@thunderscientific.com
support@thunderscientific.com
info@thunderscientific.com


Model ACS1210 Air Compressor System

Model ACS1210

Oil-less Compressed Air System

A Fully Enclosed Compressed Air Supply with Dryer & Sound Muffling Cabinet

 

FEATURES

  • 175 psiG Oil-Less Air Supply
  • Dry Air To <-30 °C Ambient Pressure Dew Point
  • Sound level <65 db
  • Vibration Isolated Compressor
  • Membrane Air Dryer
  • 10’ Air Hose Extension
  • On/Off Fuse Switch
  • 8’ Removable AC Power Cord
  • Hour Meter
  • Indoor Use Only
  • Dimensions L 24” x W 14” x H 11.70”
  • Cabinet Weight Approximately 40 Lbs.

DESCRIPTION

The ACS1210 is designed to be used as the air supply for a Model 1200 Humidity Generator. This is a fully enclosed compressed air supply incorporating a membrane style air dryer in a sound muffling cabinet. This system is ideal for in-lab use because of the low sound level at less than 65 decibels.

 

PRINCIPLE OF OPERATION

To provide the Model 1200 Humidity Generator with a clean, dry air supply and to give the laboratory a noise level that's acceptable for the lab technicians to carry on with their calibrations.

Model ACS1210 Dimensions
Dimensional Schematic of the ACS1210 Air Compressor System.

 

 

SPECIFICATIONS

The ACS1210 is an oil-less air compressor that can produce a pressure of 175 psi, at a maximum ambient air temperature of 30 °C, continuously for up to 500 hours before a minor maintenance service kit is required.

 

UTILITIES

The ACS1210 system is available in either 100/100-115V~ 50/60Hz, single phase at 1/2 HP and 10A or 220-240/230V~ 50/60Hz, single phase at 1/3 HP and 6.3A depending on your needs.

 

ORDERING INFORMATION

When ordering an ACS1210 air compressor system you will also receive a ten foot air hose extension and an eight foot removable AC power cord. If you already have a Model 1200 Humidity Generator and you only need to order the ACS1210, specify this part number when ordering. ACS1210/110 for the 110V unit and ACS1210/230 for the 240V unit. If you need to order a compressor only, specify part number GASTUNIV.

 

Back to Top

THUNDER SCIENTIFIC® CORPORATION

623 WYOMING BLVD. SE ALBUQUERQUE, NM 87123-3198
Toll Free: (800) 872-7728 Phone: (505) 265-8701 FAX: (505) 266-6203
 E-mail: sales@thunderscientific.com | support@thunderscientific.com | info@thunderscientific.com