Thunder Scientific Corporation - Humidity Generation and Calibration Equipment NVLAP - Code 200582-0

Contact Us:

Toll Free: (800) 872-7728
Phone: (505) 265-8701
FAX: (505) 266-6203

 

E-mail:

sales@thunderscientific.com
support@thunderscientific.com
info@thunderscientific.com


Model ACS2520 Air Compressor System

Model ACS2520

Air Compressor System

A Fully Enclosed Compressed Air Supply with Dryer & Sound Muffling Cabinet

 

FEATURES

  • Two 175 psiG Oil-Less Air Supplies
  • Dry Air To <-40 °C Ambient Pressure Dew Point
  • Sound level <70 db
  • Vibration Isolated Compressors
  • Membrane Air Dryer
  • Pressure Regulator and Gauge
  • 25’ Air Hose Extension
  • On/Off Circuit Breaker Switch
  • 10’ Removable AC Power Cord
  • Hour Meter
  • Indoor Use Only
  • Dimensions L 28.8” x W 18” x H 12.9”
  • Cabinet Weight Approximately 85 Lbs.

DESCRIPTION

The ACS2520 is used with a Model 2500 and will fit on the bottom shelf of the 2500 mobile cart. This is a fully enclosed compressed air supply with an air dryer and sound muffling cabinet. This system is ideal for in Lab use because the sound level is less than 70 decibels. The Model ACS2520 has a hose hold down on top for ease of storage.

 

PRINCIPLE OF OPERATION

To provide the Model 2500 Humidity Generator with a clean, dry air supply and to give the laboratory a noise level that's acceptable for the lab technicians to carry on with their calibrations.

Model ACS2520 Dimensions
Dimensional Schematic of the ACS2520 Air Compressor System.

 

 

SPECIFICATIONS

The ACS2520 has two 1/2 HP oil-less air supplies that can run with a continuous pressure of 175 psi with a maximum ambient air temperature of 40 °C at a continuous duty of 500 hours before a minor maintenance service kit is required.

 

UTILITIES

You can receive the ACS2520 system in either 100-115V @10A 50/60Hz or 220-240V @6.3A 50/60Hz depending on your needs.

 

ORDERING INFORMATION

When ordering a new air compressor system, part number ACS2520, you will receive an extension air hose, and a removable AC power cord, and the enclosure with an air compressors. If you already have a Model 2500 humidity generator, and you only need to order the air compressor system, here are the ordering part numbers. Use this part number for the 115 volts at 50/60Hz system, ACS2520-115, or if you need to order a high voltage air system, specify part this number ACS2520-230 for the 230 volts at 50/60Hz system.

 

SERVICE

Thunder Scientific does offer repair services for any of our compressor systems, just ask for a quote.

 

Back to Top

THUNDER SCIENTIFIC® CORPORATION

623 WYOMING BLVD. SE ALBUQUERQUE, NM 87123-3198
Toll Free: (800) 872-7728 Phone: (505) 265-8701 FAX: (505) 266-6203
 E-mail: sales@thunderscientific.com | support@thunderscientific.com | info@thunderscientific.com